Operating The Cut Sheet Feeder; Single-Sheet Insertion - Epson ActionPrinter 4000 User Manual

Operating the Cut Sheet Feeder

After stacking paper in
make sure that the
of paper loads automatically whenever a printable character or line
feed command is
Paper out condition
When the printer is on line and receives print data from the
computer, the first
load automatically as necessary.
In the cut sheet feeder mode, the
l
a sheet of paper is being fed, but the printer remains on line.
When the specified paper bin is empty, the printer automatically
l
goes off line, the
sounds. To resume printing, add more paper and press the
LINE
button.
Note: If you turn off your printer during the time the printer
detects a paper out or paper jam condition, any data
remaining in the printer's buffer is discarded.

Single-sheet Insertion

Your cut sheet feeder also has a single-sheet loading feature. This
feature is especially useful because it allows you to switch to a
different type or size of paper (for one sheet only) without replacing
the stack of paper in your cut sheet feeder.
the
cut sheet feeder, turn on the printer and
ON LINE
light is on. In on line status, a new sheet
sent
to the printer.
sheet
loads automatically. Subsequent sheets
PAPER OUT
PAPER OUT
light goes on, and the beeper
Using the Printer Options
The Cut Sheet Feeder
light goes on while
ON
5-11