Operating The Cut Sheet Feeder - Epson LX-810 User Manual

Cut Sheet Feeder
Note: If a sheet is not ejected properly when the cut sheet
feeder mode is on, the beeper sounds repeatedly.
Operating the cut sheet feeder
After stacking paper in the cut sheet feeder, turn on the printer
and make sure that the ON LINE light is on. In on line status, a new
sheet of paper loads automatically whenever a printable character ^
or line feed command is sent to the printer.
WARNING: If there is no paper in the cut sheet feeder, do
not use the FORM FEED button or the LOAD/EJECT
button, and do not send data to the printer.
Paper out condition
When the printer is on line and receives print data from the
computer, the first sheet is automatically loaded. Subsequent sheets
are automatically loaded as necessary. ^
• In the cut sheet feeder mode, the PAPER OUT light goes on ^
while a sheet of paper is being fed, but the printer remains on
line.
• When the paper bin is empty, the printer automatically goes
off line and the beeper sounds repeatedly. Also, the PAPER OUT ^
light goes on. To resume printing, add more paper, and press
the ON LINE button.
Note: If you turn off your printer during the time the printer
detects a paper out or paper jam condition, any data remaining ^
in the printer's buffer is discarded. ^
5-12 Using the Printer Options ^