Setting Up Your Application Software; Choosing From A Menu - Epson LQ-510 User Manual

Setting Up Your Application Software

Now that you have set up and tested the LQ-510, you should make
sure that it works with your application programs.
Most application programs let you specify the type of printer you
are using so that the program can take full advantage of the
printer's features. Many of these programs provide an installation or
setup menu that presents a list of printers to choose from.
If your application program has a printer selection menu, use the
instructions below.

Choosing From a Menu

Because the family of Epson printers shares a great many
commands, you can use an application program even if it does not
list the LQ-510 on its printer selection menu. If the LQ-510 is not
listed, choose one of the following printers. They are listed in order
of preference.
LQ-850 (LQ-950, LQ-1050)
LQ-500
LQ-2550
LQ-800 (LQ-1000)
If none of these printers is listed, select the first one available on the
following list:
LQ
EX
FX
To use all of the features of the LQ-510, however, it is best to use a
program with the LQ-510 on its menu. If your program does not list
the LQ-510, contact the software manufacturer to see if an update is
available that supports the LQ-510 model.
LX
R x
MX
SQ-2500
LQ-2500
LQ-1500
Epson printer
Standard printer
Draft printer
Setting Up the Printer 1-25