Epson LQ-510 User Manual page 53

Switching Between Continuous and Single Sheets
CAUTION: Make sure you tear off your printed document
before pressing the LOAD/EJECT button. Reverse-feeding
several pages at a time may result in a paper jam. This is
especially true for narrow paper (less than 6 inches or
152.4 mm wide).
3. Press the LOAD/EJECT button to feed the continuous paper
backward out of the printer and into the standby position. The
paper is still attached to the tractor but no longer in the paper
path.
CAUTION: Pressing the LOAD/EJECT button once may not
feed the paper far back enough to reach the standby
position. If the PAPER OUT light does not come on, you
need to press the LOAD/EJECT button again. With normal-
width continuous paper, you can press the LOAD/EJECT
button up to three times. If, however, you are using
narrow paper (between 4 and 6 inches or 101.6 and 152.4
mm) you should only press the LOAD/EJECT button once.
Also, do not use this button to eject labels.
WARNING: Never feed labels backward through the
printer. Labels can easily come off the backing sheet and
jam the printer.
2-14 Paper Handling