Epson LQ-510 User Manual page 192

Paper Handling
Problem
Single sheets do not
feed properly
(continued).
LOAD/EJECT
When the
button is pressed, the
paper feeds through
of
and then out
printer.
The feed is
paper
crooked.
The does not
paper
fully eject.
Troubleshooting
7-16
S o l u t i o n
The paper may have been between the
edge guides before the printer was turned
on. When loading single sheets, be sure
that paper is not in the paper guide before
the
you turn the printer on.
The paper guide may not be attached, or
it may not be in the correct position.
When printing on single sheets, use the
paper guide in its upright position.
The paper may be dog-eared. Use new
paper.
You may be trying to eject the paper
using the
press the
paper.
The page length setting may be wrong. If
the page length is incorrectly set by your
software, the paper may not fully eject.
Check your software settings.
FORM FEED
button. Always
LOAD/EJECT
button to eject the