Adjusting The Tear-Off Position - Epson LQ-510 User Manual

If the page perforation is not properly aligned with the tear-off edge,
you can adjust the tear-off position using micro-adjustment, as
described below.
Note: Short tear-off is not performed unless printing of a page is
completed and the paper has advanced to the top of the next
page. If the paper has not advanced to the top of the next page,
press the ON LINE button to put the printer off line and press the
FORM FEED button to advance the paper. Then put the printer back
on line and paper will feed to the tear-off position.
When you resume printing after tearing off the sheet, the paper
automatically feeds backward to the loading position before
printing begins.

Adjusting the Tear-off Position

If the paper's perforation does not meet the tear-off edge, you can
adjust the tear-off position using the micro-adjustment feature.
Using Short Tear-Off
Using the Printer
3-15