Change Macro - Epson LQ-2550 User Manual

If you have loaded a macro, the display briefly shows:
Next, the display changes to:
You are now back at the SelecType main menu.
5. To switch to one of the other main menu modes, press the
button. If you wish to exit SelecType mode, press the SelecType
button.

CHANGE MACRO

The CHANGE PlACRO mode lets you change the settings of whichever
macro is currently loaded. It also gives you the option of saving the
settings as any of the four rn-acres.
The settings available in CHhNGE MCRO mode are listed below.
FONT
PITCH
CONDENSED
FORM LENGTH*
LEFT
Using the Printer
Roman,
Script, OCR-B, OCR-FI, Draft., Orator
(optional), Orator-S (optional)
* Some fonts cannot be printed in
proportional spacing. In this case, the pitch is not
displayed.
Tractor - 24 lines to 132 lines
CSF B n 1 - 24 lines to 132 lines
i
CSF B n 2 - 24 lines to 132 lines
i
* The line spacing is in
0 to 80 columns
or V
CPI or
15
3-15