Using The Cut Sheet Feeder - Epson LQ-2550 User Manual

3. Press the LOAD/EJECT button to load an envelope. Then press the
ON LINE button to start printing.

Using the cut sheet feeder

After stacking paper in the cut sheet feeder, be sure that the ON LINE light
is lit. When the printer is on line, a new sheet of paper loads
automatically whenever a printable character or line feeding command is
sent to the printer. Subsequent sheets are automatically loaded as needed.
Be sure that you run the self test described earlier in this chapter
Note:
the first time you use the cut sheet feeder and whenever you change to
a different paper size.
When the selected paper bin is empty, the printer automatically goes off
line and the PAPER OUT light goes on. To resume printing, stack more
paper, then press the ON LINE button.
Note: If you turn off your printer during a paper out or paper jam
condition, any data remaining in the printer's buffer is discarded.
Using Printer Options
7-13