Word Processing - Epson LQ-2550 User Manual

Word Processing

ESC a
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
The following values can be used for n:
0: Selects left justification.
1: Selects centering.
2: Selects right justification.
3: Selects full justification.
The default setting is n = 0. Full justification (n = 3) is performed
when the buffer becomes full; HT, BS, and spacing commands should
not be used with justification. For n = 3 there must be no carriage
returns within a paragraph.
ESC SP (space)
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Sets the amount of space added to the right of each character, in
addition to the space already allowed in the design of the character.
The number of dots is determined by n, which should be from 0-127.
Each unit of space is 1/120th of an inch in draft and l/l80th of an
inch in Letter Quality and proportional. Double-wide doubles the unit
of space.
8-30
ESC
27 97
1B 61
ESC SP
27 32
1B 20
n
n
n
Set Intercharacter Space
n
n
n
Select Justification
Command Summary