Epson LQ-2550 User Manual page 85

3. Press the F button to indicate that you wish to change the setting.
The display changes to:
4. Press the A or V button to switch the display to
The display changes
The display changes to:
Note: If you are changing only one option, skip to step 14 at this
point. The other steps show you how to change two other options,
following the same method given for the INTERFACE option.
6. Press the V button to switch the display to BAIJD Rf3TE.
The display changes to:
The display changes to:
8. Press the
baud rate is reset to 2400 BPS.
The display changes to:
The display changes to:
10. Press the V button to switch the display to PflRITY.
The display shows:
Using the Printer
to:
or V button to set the baud rate. In this example, the
P a r a l l e l :
1.
Se r i a
9600BPS:
2400BPS:
3-21