Before reversing the paper, be sure that:
The printer is turned on.
l
The TRACTOR light on the control panel is on.
l
Check to see that the printer is off line. If it is not, press the ON LINE
1.
button to set the printer off line.
2. Press the LOAD/EJECT button once. This feeds the loaded paper
backward to its standby position. If the paper does not reach this
position, the printer briefly displays Cannot Back Out. Press the
LOAD/EJECT button as many times as necessary to back out the paper
to its standby position. (Do not use the platen knob to back out the
paper. )
Paper Handling
2-15