Character Tables - Epson LQ-2550 User Manual

Character Tables

ESC t
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Selects the character table used by codes
Extended Graphics does not disable italic printing. Italic printing can
still be selected by ESC
Selects italic character table.
0:
Selects Epson Extended Graphics character table.
1:
Re-maps any downloaded characters from the positions
2:
positions
128-255.
Note that the value of n must equal 00 hex,
See Appendix B for character tables and a hexadecimal to decimal
conversion chart.
ESC 4
Format:
ASCII code:
Decimal:
Hexadecimal:
Comments:
Causes italic characters to be printed. This command is valid even if
the Epson Extended Graphics character set has been selected by ESC t
or SelecType, but character graphics are not italicized.
Command Summary
ESC t
27
116
1B 74
The following values can be used for n:
4.
ESC
4
27 52
1B 34
n
n
n
128-255.
hex or
01
Select Character Table
Selecting Epson
0-127
hex.
02
Select Italic Mode
to the
8-31