Cut Sheet Feeder Does Not Load Paper Correctly; The Short Tear-Off Feature Does Not Work Properly; Color Printing Is Not What You Expect - Epson LQ-2550 User Manual

The paper guide may not be installed properly. See Chapter 2.
l
The paper supply may be too far from the printer or not aligned
l
with the tractor. See Chapter 2 for instructions.
Be sure that the cable cover is properly installed. See Chapter 2.
l

Cut sheet feeder does not load paper correctly

Be sure PAPER SELECT is set to CSF.
l
The cut sheet feeder may not be installed properly.
l
The paper supply may not be loaded properly. Only 150 sheets
l
may be loaded; remove any extra.
The paper may not be correct for proper operation.
l
Remove any paper jam.
l
The paper set lever of the cut sheet feeder may not be pushed
l
back.
The paper length may not be set correctly.
l
See Chapter 7 for more information on cut sheet feeder operation.

The short tear-off feature does not work properly

Be sure Auto Tear Off is set to on in SelecType or press the
l
TEAR OFF button.
Be sure that all the data in the buffer has been printed and that a
l
command has been sent to feed the paper to the top of the next
page. You may have to send a form feed.

Color printing is not what you expect

See that your software is properly installed for color printing on
l
the LQ-2550.
If your application program allows you to insert control codes,
l
see page 8-27 for the commands for color.
You can also choose the color with SelecType. See Chapter 3.
l
Troubleshooting
6-5