Epson LQ-2550 User Manual page 126

30 FOR X=1 TO 126
40READN
90
DATA
255,255
120 DATA 31,255,192,28,255,224,28,127,240,28,15,248,30,0,2521
130
DATA
140 DATA 0,31,199,0,7,231,0,1,247,0,0,255~0~0~127t0~0~63
In this program, line 20 assigns the graphics option (24-pin triple-density)
with code 39. Code 42 sets the number of pin columns at 42. Lines 80-
140 contain 126 bytes of data (42 pin columns x 3 bytes) for each pin
column. Lines 30-60 print the following design.
Notice that the dots overlap quite a bit. This design was printed using the
triple-density 24-pin graphics option because the density is the same (180
dots to the inch) in both directions.
Adding the following lines to the preceding program causes the pattern
to print 10 times in a row as shown below.
15 FOR C=l TO 10: RESTORE
65 NEXT C
Using Software and Graphics
4-21