Epson LQ-2550 User Manual page 89

Caution: This mode erases any custom-designed macros and default
settings that you have set and replaces them with the original settings.
To use the CLEAR flLL PlflCROS mode, follow the steps below.
1. Select the CLEflR flLL MCROS mode from the SelecType main menu.
The display changes to:
2. Activate this mode by pressing the b button.
The display changes to:
Press the b button to clear all macros and return them to their
preset values.
If you do not wish to clear all macros, press the 4 button.
If you chose to clear all macros, the display briefly shows:
It briefly changes to:
Then, the display changes to: 4
3. Press the b button to clear the default settings. (If you do not wish
to clear the default settings, press the 4 button.)
If you clear the defaults, the display briefly shows:
It briefly changes to:
This reminds you to turn your printer off and back on again to let
your changes take effect.
Then, it changes to:
You are now back at the SelecType main menu.
Using the Printer
3-25