Printout Is Garbled; The Printout's Orientation On The Page Is Not Correct - Epson EPL-N7000 Reference Manual

Printout is garbled

Cause
The interface cable may not be
plugged in securely.
You may not be using the
correct interface cable.
The emulation setting for the
port may not be correct.
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact
your dealer or a qualified service representative.
The printout's orientation on the page is not
correct
Cause
The page length and margins
may be set incorrectly in your
application.
The Paper Size setting may be
incorrect.
What to do
Make sure that both ends of the
interface cable are plugged in securely.
If you are using the parallel interface,
make sure that the cable is a
double-shielded, twisted-pair interface
cable no more than six feet in length.
If you are using the USB interface, use a
Revision 2.0 cable.
Specify the emulation mode by using
the printer's control panel menus. See
"Emulation Menu" on page 401.
What to do
Make sure that you are using the correct
page length and margin settings in your
application.
Make sure the correct paper size is set
in the Tray menu on the control panel.
Troubleshooting
9
9
9
9
9
9
9
9
9
9
9
9
309