Epson EPL-N7000 Reference Manual page 252

13. Close the front cover by pressing it firmly until it clicks into
place.
14. Reconnect all interface cables and the power cord.
15. Plug the printer's power cord into an electrical outlet.
16. Turn on the printer.
To confirm that the Hard Disk Drive is installed correctly, use the
printer's control panel menus to print a status sheet. See "Printing
a Status Sheet" on page 304 for instructions. If the drive is not
listed on the status sheet, try reinstalling the drive. Make sure that
the connector on the Hard Disk Drive is securely connected to the
socket on the circuit board.
Installing Options
7
7
7
7
7
7
7
7
7
7
7
7
241