Using Hdd Form Overlay - Epson EPL-N7000 Reference Manual

1. Re-access the printer driver as described in step 2 in "Creating
an overlay" on page 50.
2. Make the desired printer settings and exit the printer driver.
3. Send the same data that you made in the application to the
printer, as in step 12 under "Creating an overlay" on page 50.
This setting is available only for Form Name data.

Using HDD Form Overlay

This function enables faster printing with form overlay data.
Windows users can use the form data registered in the optional
Hard Disk Drive installed in the printer. However, only an
administrator can register or delete form data in the Hard Disk
Drive. You can access this function from the Form Selection dialog
box in the printer driver.
Note:
This function is not available if the optional Hard Disk Drive is not
installed.
Use this function by inputting the registered form name after
printing the Print List.
When the document's resolution, paper size or paper orientation
settings are different from the form overlay data that you use, you
cannot print the document with the form overlay data.
This function is available only in the ESC/Page mode.
Registering the form overlay data on the Hard Disk Drive
Only a network administrator using Windows XP/2000/NT 4.0
is allowed to register the form overlay data on the optional Hard
Disk Drive. See the Network Guide for details.
Using the Standard Printer Driver
3
3
3
3
3
3
3
3
3
3
3
3
55