Printer Driver Settings - Epson EPL-N7000 Reference Manual

7. When the screen asking you to select the printer model is
displayed, click Have Disk and specify the path to the
appropriate INF file necessary for installation. If your
CD-ROM drive is D:, the path will be
D:\ADOBEPS\ENGLISH\WIN9X\PS_SETUP (change the
drive letter as needed for your system).
8. Select the INF file for the version of the Windows operating
system that you are running and continue with the rest of the
installation according to the on-screen instructions.
9. When installation is done, click Finish.
Notice for Windows Me/98/95 Users
The printer may not print normally if the computer is connected
to the printer via the parallel interface and the ECP mode is set.
If this is the case, disable bi-directional support in the printer
driver. To do so, display the printer's Properties dialog box, click
the Details tab, then click the Spool Settings button. In the Spool
Settings dialog box that appears, Select Disable bi-directional
support for this printer, then click the OK button.

Printer driver settings

The printer driver enables you to change the settings for your
print job. The settings are grouped into various categories that
you can access by clicking the appropriate tab in the printer's
Properties dialog box.
Online help is also available to help you with the settings. There
are two online help options. Click the Help button for procedural
help on the settings. If you want help on a particular item, click
the "?" icon on the top-right corner of the dialog box's title bar
and then click the name of the setting that you want more
information on. An explanation of the setting and its options will
be displayed.
Using the PostScript Printer Driver (Windows)
4
4
4
4
4
4
4
4
4
4
4
4
103