Printout Is Garbled; The Printout Position Is Not Correct; Graphics Do Not Print Correctly - Epson Aculaser M2000 series User Manual

For Windows users, you may use the printer fonts
substituted for specified TrueType fonts.
The selected font is not supported by your printer.

Printout is garbled

Cause
The interface cable may not be plugged in securely.
You may not be using the correct interface cable.
Note:
If a status sheet does not print correctly, your printer may be damaged. Contact your dealer or a qualified
service representative.

The printout position is not correct

Cause
The page length and margins may be set incorrectly
in your application.
The Paper Size setting may be incorrect.
MP Tray Size setting may be incorrect.

Graphics do not print correctly

Cause
The printer emulation setting in your application may
be incorrect.
You may need more memory.
In the printer driver, choose the Print TrueType fonts as bitmap
check box in the Extended Settings dialog box.
Make sure that you have installed the correct font. See the
Font Guide for more information.
What to do
Make sure that both ends of the interface cable are plugged
in securely.
If you are using the USB interface, use a Revision 2.0 cable.
What to do
Make sure that you are using the correct page length and
margin settings in your application.
Make sure that the correct paper size is selected in the printer
driver settings.
Make sure that you have selected MP Tray in the Paper Source
drop-down list and specified the correct paper size in the
printer driver settings.
What to do
Make sure that your application is set for the printer emulation
you are using. For example, if you are using the ESC/Page
mode, make sure that your application is set to use an
ESC/Page printer.
Graphics require large amounts of memory. Install an
appropriate memory module. See "Memory Module" on
page 59.
Troubleshooting 92