Changing The Paper - Epson DFX-9000 Reference Manual

Changing the Paper

This section describes how to change paper on the front tractor,
but you can follow the same steps when you change the paper
on the rear tractor. Before you start, make sure the printer is
turned on and the front tractor is selected. (If you are changing
the paper on the rear tractor, select it instead.)
Caution:
c
Never change paper using this procedure if labels, continuous
forms with labels, or overlapping multi-part forms are already
loaded in the printer. Remove the labels by tearing off the fresh
supply below the tractor and pressing LF/FF Load to eject the
remaining labels. Then load the new paper. (See "Loading Paper
Onto the Front Tractor" on page 15 or "Loading Paper Onto
the Rear Tractor" on page 22) for instructions.
1. If you have a printed document still in the printer, use the
tear-off feature to tear off the document or excess paper.
Caution:
c
Always tear off printed documents before changing the
paper. Never feed more than one page backward through the
printer.
2. Press the Front/Rear button to switch to the rear tractor. The
front-loaded paper automatically feeds back to the standby
position.
38
Paper Handling