Installing The Perforation Cutter - Epson DFX-9000 Reference Manual

If you plan to load continuous paper from the rear tractor, be
sure to leave enough room around the printer for the attached
perforated paper output attachment and the output tray, and for
the stack of fresh paper. Make sure you align your paper supply
with the paper loaded in the tractor so the paper feeds smoothly
into the printer.
The following illustration shows one way to position your paper
with the rear tractor loaded.

Installing the perforation cutter

The steps below show you how to install the perforation cutter.
You will need a cross-head screwdriver.
Note:
If you plan to use the perforation cutter with the built-in rear tractor,
you need to load paper onto the rear tractor before you install the
perforation cutter. See "Loading Paper Onto the Rear Tractor" on
page 22 for instructions.
144
Options and Consumables