Changing The Printer Settings - Epson DFX-9000 Reference Manual

Changing the
The following tables show the settings you can change for your
printer through the printer driver. Note that not every setting is
available in all versions of Windows.
Change any settings as necessary, then click OK to apply the
settings. (If you need to cancel your changes, click Cancel or
Restore Defaults.)
Printer settings
Settings
Paper Size
Orientation
Paper Source
Resolution/
Graphics
Resolution
Dithering
Intensity
Print Quality
Printer Settings
Explanations
Select the size of the paper you want to use. If you do
not see your paper size, use the scroll bar to scroll
through the list. If your paper size is not included in the
list, see "Defining a Custom Paper Size" on page 55 for
instructions.
Select Portrait or Landscape.
Select the paper source you want to use.
Select the printing resolution you want. The higher the
resolution you select, the more detailed your printout
will be; however, increasing the resolution slows
printing.
You can leave this option set to Fine, which is the
default setting, or select another dithering pattern
depending on the kind of printout you want.
Move the slider to make your printout lighter or darker.
Select a print quality option from the Print Quality list.
If you set Hi-speed to On, the printer enters bidirectional
printing mode and printing speed will increase. Setting
Hi-speed to Off will return the printer to unidirectional
printing mode. Printing speed will decrease, but
printing precision will improve. Printing with the default
settings uses the settings stored in the printer.
Printer Software
3
3
3
3
3
3
3
3
3
3
3
53