Using The Perforation Cutter - Epson DFX-9000 Reference Manual

Using the perforation cutter

This section describes how to use the perforation cutter with
continuous paper. Before printing with the perforation cutter
installed, set the page length to match your paper using your
software or SelecType mode. See "Changing the settings in
SelecType mode" on page 94 for details.
Note:
The perforation cutter requires that the paper have perforations; for
best results, the paper should be fan-folded.
The last page may not be ejected completely. If this happens, gently
pull it out of the printer.
The perforation cutter cannot cut the last 11 inches of continuous
paper.
150
Options and Consumables