Software settings override
settings you make using the
default-setting mode or the
control panel buttons.
Vertical printed lines are not aligned.
Cause
Bidirectional printing, which
is the printer's standard
printing mode, is out of
alignment.
Option problems
The perforation cutter is installed and the printer does not feed
continuous paper properly.
Cause
The perforation cutter's
connector is not plugged
securely into the printer.
116
Problem Solving
Use your application software to select
the font.
What to do
Use the printer's bidirectional
adjustment mode to correct this
problem. See "Aligning Vertical Lines in
Your Printout" on page 123.
What to do
Turn off the printer, then check the
perforation cutter connector.