Removing The Pull Tractor - Epson DFX-9000 Reference Manual

Removing the pull tractor

To remove the pull tractor you'll need a cross-head screwdriver
and the paper separator that was originally installed on the
printer.
1. Remove any paper installed on the tractor and turn off the
printer.
2. Open the back cover and locate the levers that lock the pull
tractor in place on the printer. Pull these levers forward to
release the pull tractor. Then lift the tractor up and out of the
printer.
3. Close the back cover and open the paper separator cover.
142
Options and Consumables