Changing The Paper Width - Epson TM-T20II Technical Reference Manual

Changing the Paper Width

You can change the paper width from 80 to 58 mm by installing the included 58-mm width paper
guide plate. Follow the steps below to change the paper width.
Because some parts of the print head and the autocutter contact the platen and they may
become worn out, once you change the paper width from 80 to 58 mm and use the printer,
you cannot change it back to 80 mm.
1
Open the roll paper cover.
2
Align 3 projections on the 58-mm width paper guide plate with the
rectangular holes in the printer, and push it downwards.
3
Make the setting for the paper width with the memory switch.
For information about the memory switch, see
Enhancement" on page
58-mm width
paper guide plate
Rectangular holes
46.
"Setting the Memory Switches/Receipt
Chapter 2 Setup
2
37