Omron V680S Series User Manual page 95

 RF Tag Communications Errors
Error code name
RF Tag missing error
RF Tag communications error
Tag ID mismatch error
RF Tag address error
RF Tag lock error
RF Tag verification error
RF Tag data lost error
RF Tag system error
RF Tag overwriting error
Reader/Writer connection error
 Reader/Writer Operation Errors
Error code name
Unfixed operation mode error
User setting error
 System Errors
Error code name
System startup errors
System memory error
Profile error
Hardware fault
IC error
Configuration memory
error
Error code
2001 hex There is no RF Tag in the interrogation zone.
2002 hex Communications with the RF Tag did not end normally.
2003 hex An RF Tag with the specified ID was not in the interrogation zone.
2004 hex The access address for the RF Tag is outside of the area supported by
the target RF Tag.
2005 hex An attempt was made to write data to a locked area.
2006 hex Processing to write data to the RF Tag did not end normally.
2007 hex Processing to write data to the RF Tag did not end normally.
(Data may have been lost and must be restored.)
2008 hex The RF Tag returned an error response.
2009 hex The overwrite limit was exceeded for overwrite count control processing.
200A hex When copying data, communications could not be established with the
copy destination Reader/Writer.
Error code
8001 hex The control signal was not stable when the Reader/Writer was started. A
record is recorded only in the system error log.
8002 hex An error was detected in user configuration memory when the Reader/
Writer was started. A record is recorded only in the system error log.
The Attached information1, representing the erroneous classification
settings.
00000001 hex: Network settings
00000002 hex: RF Tag communication settings
Error code
F001 hex An error was detected in system memory. A record is recorded only in
the system error log.
F002 hex An error was detected in the profile data. A record is recorded only in the
system error log.
F011 hex An error was detected in an IC in the Reader/Writer.
F012 hex An error was detected when accessing configuration memory.
Host Communications Specifications
Description
Description
Description
Section 5
RFID System
93
User's Manual