Omron V680S Series User Manual page 72

Section 3
Installation and Connections
 V680S-D2KF68/-D8KF68
Mount the RF Tag with M4 screws. Tighten the screws to a torque of 0.7 to 1.2 N·m.
M4 screw
Spring washer
Flat washer
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D2KF68.
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D8KF68.
You can use the V680S-D8KF68 with Reader/Writers with firmware version 2.00 or higher.
 V680S-D2KF68M/-D8KF68M
Mount the RF Tag with M4 screws. Tighten the screws to a torque of 0.7 to 1.2 N·m.
M4 screw
Spring washer
Flat washer
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D2KF68M.
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D8KF68M.
You can use the V680S-D8KF68M with Reader/Writers with firmware version 2.00 or higher.
RFID System
70
User's Manual
Marked side
p.222
p.222
Marked side
p.222
p.222
44
76
44
76
Two, M4 holes
(Unit: mm)
Two, M4 holes
(Unit: mm)