Section 6
Browser Interface
Communications Settings View
Item name
RF Tag Communications
option
RF Tag Communications
Speed
Write Verify
Use diagnostics
Refer to Communications Options in Section 2 Names and Functions of Components for information of RF Tag
Communications option.
Refer to SET TAG COMMUNICATIONS CONDITIONS Query in Section 2 Names and Functions of Components for
information of RF Tag Communications option.
The settings are immediately reflected when you click the "Set" button.
When the Reader/Writer is running in safe mode, this screen can not be operated. Please run the Reader/Writer in RUN
mode.
Refer to RFID System Maintenance in Section 2 Names and Functions of Components f for communication diagnostic.
The error message is displayed if you change the configuration during the Reader/Writer is executing RF tag
communication or Noise measurement.
RFID System
142
User's Manual
Description
Select the RF Tag communications
option.
Specify the speed of communications
with the RF Tags.
Select this check box to enable write
verification.
Select to enabled or disabled.
p.31
p.38
p.45
Click this button to set
the displayed values.
Setting range
Once, Auto, or FIFO Trigger
High speed or Normal speed
Enabled/disabled
Enabled/disabled
Default
Once
High speed
Enabled
Enabled