Omron V680S Series User Manual page 69

 V680-D8KF67
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680-D8KF67.
p.222
 V680-D8KF67M
Mount the V680-D8KF67M to a metal surface.
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
When you install the RF tag, please have the bracket as shown in the figure below.
Material: Steel, SUS
32
±0.2
40
Although it is possible to use aluminum in addition to iron and copper as a mounting bracket, communication
performance will change depending on the material. Please do not use resin as a mounting bracket.
Refer to Influence of Surrounding Metal in Section 8 Appendices for information on the effect of metal at the back
surface of the V680-D8KF67M.
p.224
Two, M3 hole
Bracket
(Unit: mm)
Installation and Connections
Mounting Hole Dimensions
Two, M3 holes
M3 screw
Marked side
Mounting Hole Dimensions
Two, M3 holes
M3 screw
Marked side
V680-D8KF67M
Screw mounting
Section 3
32
0.2
32
0.2
32
0.2
32
0.2
RFID System
67
User's Manual