Section 8
Appendices
V680-D8KF68A
Influence of Metal at Back Surface of RF Tags
The communications range will decrease if there is metal at the back of the V680-D1KP68A RF Tag. If
the RF Tag is mounted on metallic material, use a non-metallic spacer (e.g., plastic or resin). The
following graphs show the relationship between the distance from the RF Tag to the metallic surface
and the communications range.
V680S-HMD64-ETN and V680-D8KF68A
Distance (x) to the metal plate in back of RF Tag
Reader/Writer
Metal
Non-Metallic material
RFID System
226
User's Manual
Metal at back surface
Communications
range
RF Tag
V680S-HMD66-ETN and V680-D8KF68A
Distance (x) to the metal plate in back of RF Tag
Reader/Writer
Communications
range
RF Tag
Metal
Non-Metallic material
Metal at back surface