Omron V680S Series User Manual page 145

RF Tag Communications View
Displays the query
to send.
Select this check box to
repeatedly send the query.
1. Query Area
Item name
Reading RF Register number
Tag
Read data size
Writing RF Register address
Tag
Data to write
Display of query to send
Repeat
2. Response
Item name
Response
Error code
Specify in 4-digit hexadecimal the start address for reading data
from the RF Tag.
Specify in 4-digit hexadecimal the number of words of data to
read from the RF Tag.
Specify in 4-digit hexadecimal the start address for writing data in
the RF Tag.
Specify the data to write to the RF Tag.
Displays the query to send if communications are performed with
an RF Tag. Enter the query directly when you are not
communicating with an RF Tag. If you enter the query directly,
you cannot use a transaction identifier of FFFF hex.
Select this check box to repeatedly and consecutively send the
query.
Clear the selection of this check box if the RF Tag
communications option of the Reader/Writer is set to Auto. If a
query is sent repeatedly and consecutively with the Auto option,
an execution status error will occur.
Displays the response that was returned from the Reader/Writer.
The background color will be green when the operation will be done normally.
If the response from the Reader/Writer indicates an error end, the error code and a description
will be displayed in red.
Click this button to send
the query.
Description
Description
Section 6
Browser Interface
1
2
3
Setting range
0000 to 0999 hex
0001 to 007D hex
0000 to 0999 hex
1 to 113 words
---
---
RFID System
143
User's Manual