V680S-D2KF67/-D8KF67
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D2KF67.
p.222
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D8KF67.
p.222
You can use the V680S-D8KF67 with Reader/Writers with firmware version 2.00 or higher.
V680S-D2KF67M/-D8KF67M
Mount the V680-D8KF67M to a metal surface.
Mount the RF Tag with M3 screws.
Tighten the screws to a torque of 0.6 N·m.
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D2KF67M.
p.222
Refer to Influence of Metal at Back Surface of RF Tags in Section 8 Appendices for information on the effect of metal at
the back surface of the V680S-D8KF67M.
p.222
You can use the V680S-D8KF67M with Reader/Writers with firmware version 2.00 or higher.
Installation and Connections
Mounting Hole Dimensions
M3 screw
32
0.2
Marked side
32
Mounting Hole Dimensions
M3 screw
32
0.2
Marked side
32
Section 3
Two, M3 holes
0.2
Two, M3 holes
0.2
RFID System
69
User's Manual