Display Submenu Functions And Select Options - Epson ActionLaser Plus User Manual

Using SelecType
Set an option
When you reach the option you wish to use, press the
An asterisk (*) appears next to the option, indicating that it has been
set. The option stops blinking and the function starts blinking. To
implement your SelecType changes, see
SelecType later in this chapter.
If you want to return to
option, make sure
appears in the display. (If necessary, use the arrows to move to the
current option.) Press the
the menu function begins blinking. You can now
function.

Display submenu functions and select options

When you want to enter the emulation or interface submenus
SelecType main menu, follow the steps described below.
the
Note: Options for
Options section later in this chapter.
HP and FX emulation submenus
To enter the emulation submenu, follow the steps described below:
1. Press the
in display.
the
2. Press the
SET
3. If necessary, use the
prefer, HPLJ2 or
EMULATION = HPLJ2*
3-14
Using the Printer
menu functions without setting a
the
option (the one with the asterisk)
the current
button. The option stops blinking and
SET
function are described in the SelecType
each
or button until you
button to switch to
or
The example below shows
FX.
section on exiting
the
move to a new
see the EMULATION
current option.
the
button to select the option you
button.
SET
new
from
function
HPLJ2.