Epson ActionLaser Plus User Manual page 70

Epson actionlaser plus: user manual
Hide thumbs Also See for ActionLaser Plus:
Table of Contents

Advertisement

Using SelecType
Interface submenu
To enter
interface submenu from the main menu, follow the
the
steps below:
1. Press the
display.
2. Press the
SET
starts blinking, indicating that it has been activated.)
3. If the
function
I/F
button to select the
4. Press the
SET
appears next to
I/F = SERIAL*
5. Press the
SET
where you can change options for the menu functions listed
below. (The SelecType Options section in this chapter describes
options for these functions in detail.)
BAUDI RATE
PROT
DATA BIT
PARITY
STOP BIT
ROBUST-XON
6. Use the
or
change.
Note: This submenu does not work in a loop. Pressing the
button when
button when
submenu and return to the main menu.
3-16
Using the Printer
button until you see the I/F function in the
or
button to activate the menu option. (The option
is set to the PARALLEL
SERIAL
button to set
the SERIAL
SERIAL.
button a third time to enter
button to move to a function you
is displayed or pressing
BAUD RATE
ROBUST-XON
option, press
option.
option. An asterisk (*)
the
is displayed causes you to exit the
the
interface submenu,
want to
the

Advertisement

Table of Contents
loading

Table of Contents