Epson ActionLaser Plus User Manual page 42

Testing the Printer
3. Take a stack of paper and fan it. Next, tap the edges of the paper
on a flat surface to even up the stack.
4. Insert the stack of paper into the paper cassette, making sure
that top of the stack does not cover
the
paper cassette.
5. Slide the paper guides together (if necessary) until they are both
resting lightly against the paper.
6. Close the manual feed tray.
7. Reinsert the paper cassette into the printer with the arrow on the
side of cassette pointing into the printer. Rush the cassette in
the
until it goes no further and lower the end of the cassette (the end
you load paper into) until it drops into place.
CAUTION:
cassette into place. If the cassette is not installed properly,
the message
Testing and Connecting Your Printer
2-4
the paper in gently as far as it can go.
Push
It is particularly important to lower the
PAPER EMPTY
red line inside the
the
appears in display.
the