Epson ActionLaser Plus User Manual page 105

If you set the paper size with a print command that differs from the
size selected in SelecType, the message
the
CONTINUE/RESET
line.
After clearing the error, you have two options:
1. Change
the
change the paper size to match. Press
exiting SelecType to continue printing.
2. Alternatively, press
current paper. (The
the
in the display.)
For certain nonstandard sizes of paper, you may need to use
manual feed option described in Chapter 4.
Character clipping
If a character is partially outside the printable area,
does not print any portion of
prints that portion of the character within the printable area, making
it easier to tell when you have exceeded your margins.
button to clear the error; the printer is set off
paper in the cassette; then enter SelecType and
the ON LINE
message PAPER
the
CHANGE appears. Press
PS
the ON LINE
button to continue printing on
SIZE
character. The ActionLaser Plus
Printer Modes 5-7
HP Emulation
button after
appears
ERR0R
the
HP LaserJet
the