Epson ActionLaser Plus User Manual page 159

WARNINGS:
Opening the printer exposes the fuser, the orange area
l
marked with a caution label. This unit is very hot, so
be careful not to touch it.
This procedure exposes the green drum unit. Because
l
the drum is light-sensitive, it should not be exposed to
room light for any longer than necessary (a few
minutes at most). Thus, it is recommended that you
cover the drum unit with a soft cloth or sheet of paper
whenever the drum is exposed.
3. Locate the main charger wire, which extends along the length of
the green drum inside a slot directly over the drum. This wire is
thin and difficult to spot instantly.
CAUTIONS:
When cleaning the main charger wire, be careful not to
l
press too hard. The wire is delicate and can break if
you apply too much pressure to it.
Avoid dripping alcohol on the drum.
l
Maintenance and Transportation
General Printer Maintenance
6-29