Epson ActionLaser Plus User Manual page 75

COPIES = 01*
You can change the setting to print between one and 99 copies of
each page.
AUTO CONT = ON*
When this option (automatic continue) is on, your printer
automatically continues printing after a 10 second pause when one
of the following errors occurs: paper size, error 20
overflow), error 21 (page too complex), error 22 (communication
error), and error 40 (parity/baud rate error). When this option is off,
must press the
you
Chapter 7 for details on error messages.
EMULATION = HPLJ2*
This option allows you to enter
(described in the following sections).
I/F = PARALLEL*
This option selects the printer interface. When
set, this option is used to enter the interface submenu (described
later).
01 through 99
ON*
OFF
CONTINUE/RESET
the
button to continue printing. See
HPLJ2*
FX
HP or FX emulation submenu
PARALLEL*
SERIAL
the
Using the Printer
SelecType Options
(memory
serial interface is
3-21