Epson ActionLaser Plus User Manual page 65

Epson actionlaser plus: user manual
Hide thumbs Also See for ActionLaser Plus:
Table of Contents

Advertisement

Use of these buttons is described in more detail in the following
sections.
CONTINUE/RESET
CAUTION: This initializing procedure returns all
SelecType options to their factory settings, cancelling all
changes you have made. It should be used with care.
SET
This button has several uses related to
SelecType.
Implementing SelecType changes - After
you exit SelecType (with the printer off
line), hold down
seconds (until the message
appears) to make your SelecType settings
take effect.
Initializing SelecType settings to factory
defaults - In SelecType mode, hold down
the
CONTINUE/RESET
seconds (until the message INITIALIZE
appears). Then hold down the button for
three more seconds (until the message
appears) to return all SelecType
RESET
functions to the factory settings. See the
section on initializing SelecType for full
details.
Use
button to select and set
the SET
SelecType options.
The SelecType Control Panel
button for three
this
RESET
button for three
Using the Printer
3-11

Advertisement

Table of Contents
loading

Table of Contents