Pump Matrix - Graco Husky 715 Instructions And Parts List

Husky 715 Aluminum and Stainless Steel Pumps, Series E
Your Model No. is marked on the pump's serial plate. To determine the Model No. of your pump from the following
matrix, select the six digits which describe your pump, working from left to right. The first digit is always D,
designating Husky diaphragm pumps. The remaining five digits define the materials of construction. For example, a
pump with a Husky 715 aluminum air motor, aluminum fluid section, acetal seats,
D 6 3 – 2 1 1.
diaphragms is Model
in the matrix do not correspond to the ref. nos. in the parts drawing and lists.
Diaphragm
Pump Air Motor
D (for all pumps) 6 (Husky 715;
aluminum)

Pump Matrix

To order replacement parts, refer to the part lists on pages 26–30. The digits
Fluid Section – Guides
1 (acetal; see – 1 (not used)
manual 308–444)
2 (polypropylene; – 2 (acetal)
see manual
308–444)
3 (aluminum) – 3 (316 sst)
4 (sst) – 4 (not used)
A (acetal BSPT) – 5 (not used)
see manual
308–444
B (polypropylene – 6 (not used)
BSPT) see
manual 308–444
C (aluminum – 7 (not used)
BSPT)
D (sst BSPT) – 8 (not used)
– 9 (polypropylene)
– A (not used)
– B (not used)
PTFE PTFE
balls, and
Balls Diaphragms
PTFE PTFE
1 ( ) 1 (
2 (not used) 2 (not used)
3 (316 sst) 3 (not used)
4 (not used) 4 (not used)
5 (Hytrel ) 5 (Hytrel )
6 (Santoprene ) 6 (Santoprene )
7 (buna-N) 7 (buna-N)
8 (Viton ) 8 (Viton )
9 (not used) 9 (not used)
A (not used) A (not used)
B (not used) B (not used)
)