Console Port Pinout Assignments; Regulatory Compliance; Compliance Standards - Enterasys SecureStack C2 C2G170-24 Hardware Installation Manual

Console Port Pinout Assignments

Table A-11 MGBIC-02 / Specifications (continued)
Item
Data Rate
TX Output impedance
RX Input impedance
Console Port Pinout Assignments
The Console port is a DB9 serial communications port for local access to Local
Management. Refer to Figure
Figure A-1
1 Pin 2, Received Data (input)
2 Pin 3, Transmitted Data (output)

Regulatory Compliance

The C2G170‐24 meets the safety and electromagnetic compatibility (EMC) requirements
listed in Table
Table A-12 Compliance Standards
Regulatory Compliance
Safety
Electromagnetic Compatibility
(EMC)
A-6 Specifications
Specification
1 Gbps, IEEE 802.3:2000 compatible
1000BASE-T operation only
Automatic crossover detection
100 ohms, typical at all frequencies between 1 MHz and
125 MHz
100 ohms, typical at all frequencies between 1 MHz and
125 Hz
A‐1 for the Console port pin assignments.
Console Port Pinout Assignments
Â
Á
À
A‐12:
3 Pin 5, Signal Ground
All other pins not connected.
Standards
UL 60950, CSA C22.2 No. 60950, 73/23/EEC, EN 60950,
and IEC 60950. The Mini-GBICs support laser connections
that meet the EN 60825 and 21 CFR 1040.10 standards.
47 CFR Parts 2 and 15, CSA C108.8, 89/336/EEC,
EN 55022, EN 61000-3-2, EN 61000-3-3, EN 55024,
AS/NZS CISPR 22, and VCCI V-3.