Figure 7-6 STA Port Configuration Screen
Field Descriptions
Refer to
Table 7-6
for a functional description of each screen field.
Table 7-6 STA Port Configuration Screen Field Descriptions
Use this field...
Fast forwarding mode
of all ports
Type
Priority
To...
Enable or disable the forwarding of packets on all ports currently
displayed.
See 10/100TX, 100FX, 1000LX or 1000SX port.
Define the priority for the use of a port in the STA algorithm. If the
path cost for all ports on a switch are the same, the port with the
highest priority (i.e., lowest value) will be configured as an active
link in the spanning tree. Where more than one port is assigned the
highest priority, the port with lowest numeric identifier will be
enabled. The default is 128.
The range is 0 - 255.
Spanning Tree Configuration Menu Screen
Device Control Menu Screens
7-13