Q Vlan Current Table Information Screen - Enterasys Matrix E5 5H153-50-G User Manual

7.13 802.1Q VLAN CURRENT TABLE INFORMATION SCREEN

Screen Navigation Path
Password > Main Menu > Device Control Menu > 802.1Q VLAN Current Table Information
When to Use
To see the current port members of each VLAN and whether or not the port supports VLAN
tagging. Ports assigned to a large VLAN group that crosses several switches should use VLAN
tagging. However, if you just want to create a small port-based VLAN for one or two switches, you
can assign ports to the same untagged VLAN (refer to
shown in Figure 7-18.
NOTE: Under the screen field heading of Egress Ports, Forbidden Egress Ports, or
Tagged Ports, each number (1 or 0) represents a port. For example, next to 1- 24 under
the Ports field heading, the leftmost number represents port 1 and the rightmost number
represents port 24.
How to Access
Use the arrow keys to highlight the 802.1Q VLAN Current Table Information menu item on the
Device Control Menu screen and press ENTER. The 802.1Q VLAN Current Table Information
screen, Figure 7-18, displays.
802.1Q VLAN Current Table Information Screen
Section 7.15). The current configuration is
Device Control Menu Screens 7-37