Table of Contents
Advertisement
B.3
FORWARDING TAGGED/UNTAGGED FRAMES
Ports can be assigned to multiple tagged or untagged VLANs as shown in
the switch is, therefore, capable of passing tagged or untagged frames. To forward a frame from a
VLAN-aware device to a VLAN-unaware device, the switch first decides where to forward the
frame, and then strips off the VLAN tag. However, to forward a frame from a VLAN-unaware
device to a VLAN-aware device, the switch first decides where to forward the frame, and then
inserts a VLAN tag reflecting this port's default VID. The default PVID is VLAN 1, but this can
be changed as described in
Figure B-1 Example of Multi-Switch VLAN Configuration
B.4
FORWARDING TRAFFIC WITH UNKNOWN VLAN TAGS
Up to 4096 VLANs are supported by the IEEE 802.1Q standard, but this switch only supports
1024 VLANs. Therefore, if this switch is attached to any device that forwards frames with
unknown VLAN tags, or to end stations which issue VLAN registration requests for unknown
VLANs, this traffic will be dropped.
Section
7.15.
Forwarding Tagged/Untagged Frames
Figure
Virtual LANs (VLANs)
B-1. Each port on
B-3
Advertisement
Table of Contents
