Enterasys Matrix E5 5H153-50-G User Manual page 117

Table 7-22 Static Unicast Address Table Screen Field Descriptions (Continued)
Use this field...
Port
(Upper part of screen)
Status
(Upper part of screen)
MAC
(Lower left side of screen)
VID
(Lower right side of screen)
MAC
(Lower right side of screen)
Port
(Lower right side of screen)
Static Unicast Address Table Configuration Screen
To...
See the port to which the host device is attached.
See the current Status of operation set for this static unicast
address. The status settings displayed include:
Permanent – Currently in use and will remain so after the
next reset of the switch.
DeleteOnReset – Currently in use and will remain so until
the next reset.
Lock Port – In port locking mode enabled.
Unlock Port – Port locking mode disabled.
Invalid – Corresponding entry removed from table.
DeleteOnTimeOut – Currently in use and will remain so
until it is aged out.
Other – Currently in use, but the conditions under which it
will remain, differ from the preceding values.
Enter the MAC address from which you want to begin
displaying data.
Enter the VID which will be associated with the MAC
address entered in the MAC field to the left of this field.
Enter a MAC address to associate with the VID entered.
Enter the Port number to be associated with the VID and
MAC address.
Device Control Menu Screens 7-45