Table of Contents
Advertisement
4
4.5 Oil filling
Important
•
For safety precautions see
•
Before proceeding with operation, read
1. Loosen the oil filler cap A.
2. Add the type oil recommended (
3. Before checking oil engine needs to be level.
4. Remove the oil dipstick B and check that the level is up
to but does not exceed the MAX.
5. If level is not at the MAX. level, add additional oil.
6. Re-tighten the cap A.
Important
•
Do not use the engine with the oil level below the
minimum.
NOTE : Click on the right to play the procedure.
4.6 Coolant filling
Important
•
proceeding with
operation, read
Par. 3.2.2
NOTE: Refer to the
technical
documentation of the
vehicle.
4.7 AdBlue filling
NOTE: Refer to the technical documentation of the vehicle.
EN
36
INFORMATION ABOUT USE
Par. 2.4
Tab. 2.2
Warning
•
Before
decalcified water - must be used.
•
The freezing point of the refrigerant mixture depends on the amount
concentration in water.
.
•
As well as lowering the freezing point, the antifreeze also raises the
boiling point.
•
A 50% mixture is recommended to ensure a general level at
protection prevents the formation of rust, galvanic currents and
calcium deposits (
.
Par. 3.2.2
.
).
4.1
4.2
https://www.youtube.com/embed/
HWCzK41Br1U?rel=0
An anti-freeze protection liquid (ANTIFREEZE) - mixed with
Par. 2.7
).
Advertisement
Table of Contents
