4
4.5 Oil filling
Important
•
For safety precautions see
•
Before proceeding with operation, read
•
Do not use the engine with the oil level below the minimum.
1. Loosen the oil filler cap A or the oil filler cap C if the
cap A is not accessible.
2. Add the type of oil recommended
2.2).
1. Before checking oil engine needs to be level.
2. Remove the oil dipstick B and check that the level is
up to but does not exceed the MAX .
3. If level is not at the MAX . level, add additional oil.
4. Re-tighten the cap A or C.
NOTE: Click on the right to play the procedure.
4.6 Coolant filling
Important
• Before proceeding with operation, read
Warning
• An anti-freeze protection liquid (ANTIFREEZE) - mixed with decalcified water - must be used.
• The freezing point of the refrigerant mixture depends on the amount concentration in water.
•
As well as lowering the freezing point, the antifreeze also raises the boiling point.
•
A 50% mixture is recommended to ensure a general level at protection prevents the formation of
rust, galvanic currents and calcium deposits
EN
26
INFORMATION ABOUT USE
Par.
2.4.
Par.
3.2.2.
(Tab. 2.1
and
Par.
3.2.2.
(Tab.
Tab.
Fig 4.1
Fig 4.2
https://youtu.be/A5WuDZuItu4
2.4).