Table of Contents
Advertisement
4
4.3 Starting and turning off
4.3.1 Starting
1. Check the level of the engine oil, fuel and coolant and fill if necessary (
2. Put the ignition key in the ignition switch (if supplied).
3. Tun the key to ON position.
4. Turn the key beyond the ON position and release it when the engine starts (the key will return into
ON position automatically).
Important
•
start, wait for one minute before repeating attempt.
•
If engine does not start after two attempts see
4.3.2 After starting
Warning
•
running.
•
Run at minimum speed for a few minutes according to table (except constant speed engine).
NOTE: To avoid damaging the engine do not use it mostly at idle for a long time.
≤ -20°C
from -20°C a -10°C
from -10°C a -5°C
from -5°C a 5°C
≥ 5°C
4.3.3 Turning off
1. Do not turn off the engine when it is running at the maximum rotation speed (except constant
speed engine).
2. Before turning it off, keep it idle at minimum speed for about 1 minute.
3. Turn the key to OFF position.
EN
34
INFORMATION ABOUT USE
Do not actuate the starter for more than 15 seconds at a time. If the engine does not
Make sure that all the warning lights on the control panel are off when the engine is
AMBIENT TEMPERATURE
Par. 4.5
Tab. 7.1 and Tab. 7.2
to found the cause.
e
Par. 4.6
).
TIME
2 minutes
1 minutes
30 seconds
20 seconds
15 seconds
Advertisement
Table of Contents
